The self starting generator is a type of power supply device. During the rainy and humid summer season, precautions should be taken to prevent moisture when using the self starting generator. The specific methods and measures are explained below.
1. Strategic Placement
Always install your self starting generator on elevated concrete pads with proper drainage. The unit should be positioned at least 30cm above ground level to avoid water accumulation. For coastal areas, consider installing moisture-resistant enclosures specifically designed for self starting generator.
2. Ventilation Management
While self starting generator need weather protection, never compromise airflow. Use louvered panels that block rain while permitting air circulation. Monthly inspection of ventilation ducts is mandatory – clogged vents in self starting generator create ideal conditions for condensation.
3. Component-Specific Protection
Focus on three critical areas in your self starting generator:
Apply dielectric grease to electrical contacts
Install moisture-absorbing packets in control panels
Use hydrophobic coatings on exposed metal surfaces
4. Operational Best Practices
Run your self starting generator monthly for 15-20 minutes regardless of power needs. This burns off accumulated moisture in the system. After storm exposure, manually initiate the self-starting generator even if automatic activation didn’t occur, ensuring all components remain functional.
Modern self starting generator incorporate moisture sensors, but these shouldn’t replace physical precautions. By implementing these measures, you significantly extend the service life of your self starting generator while maintaining its reliable automatic operation capability.
More information about self starting generator:https://wffdj.com/
